Built on trust, grown through integrity yw@zh-lx.com 繁體

Transparent Silicone Tube for Peristaltic Pumps: Plan Fatigue Life With Testable Cycles

Transparent Silicone Tube for Peristaltic Pumps: Plan Fatigue Life With Testable Cycles

Transparent Silicone Tube for Peristaltic Pumps: Plan Fatigue Life With Testable Cycles

For metered transfer in food and bioprocess peristaltic pumps, soft recovery, a round bore and uniform walls make transparent silicone tube samples easier to compare. Lixing platinum-cured transparent silicone tubing is available from Shore A 30 to 80. Procurement and engineering teams still need cycle tests with the actual pump head, fluid and speed because catalog data cannot be converted directly into service life.

Uniform walls make compression conditions repeatable

Every pump revolution closes and releases the tube under a roller. The product page lists a standard dimensional tolerance of ±0.1 mm and precision capability down to ±0.05 mm. That control can reduce wall variation as a test variable, but it does not establish a guaranteed cycle count for any pump.

A broad hardness range supports grouped sampling

Recovery and occlusion depend on hardness, bore, outside diameter and wall thickness together. This platinum-cured silicone tube is offered from Shore A 30 to 80, allowing a small sample matrix to be tested at the same occlusion and speed while teams track flow drift, visible cracking and recovery.

Clarity keeps inspection focused on the fluid path

High clarity, odorless material and the absence of phthalate plasticizers are stated product features. Dosing lines for flavors or colors in food equipment, as well as bioprocess and laboratory transfer, can be inspected for residue, discoloration and localized deformation during planned stops. Compatibility still needs confirmation with the actual fluid and cleaning chemistry.

Organize mixed duty cycles with cumulative damage

The Miner linear cumulative fatigue damage model is D = sum(n_i / N_i). D is a dimensionless cumulative damage index, n_i is the number of applied cycles at condition i, and N_i is cycles to failure from a specimen tested at the same condition. The model can organize relative fatigue exposure across several speeds or loads only after data exist for the same material, dimensions, temperature, fluid and compression setup.

The linear model omits load-sequence effects, viscoelastic heating, fluid compatibility and interacting crack growth. It is a test-planning tool, not a tubing-life specification. Record pump-head geometry, occlusion, speed, operating temperature, cleaning method and the failure criterion, then obtain N_i from representative samples.

Turn the sample request into comparable conditions

Provide bore, outside diameter or wall thickness, target hardness, fluid, temperature, pump model, speed and cleaning conditions with the inquiry. The catalog range of -50°C to 200°C describes the material offering and does not predict fatigue life in a peristaltic pump. Food and bioprocess teams can review transparent silicone tube options before defining a controlled cycle trial.

#TransparentSiliconeTube #PeristalticPump #FoodEquipment #Bioprocessing #FatigueTesting

Transparent Silicone TubePeristaltic PumpSilicone TubingFood EquipmentFatigue Life

Need a recommendation or samples?

Tell us your process temperature, pressure and size requirements, and our engineers will recommend the right material.